PartsTable
Technical Data Sheet
Download PDF

8445076-61 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

8445076-61: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, surface_treatment: OXIDE OVERALL, pin_overall_length: 0.719 INCHES NOMINAL IN, pin_overall_diameter: 0.0785 INCHES NOMINAL IN, first_end_taper_angle: 25.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-076-8221, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8445076-61
NSN: 5315-01-076-8221
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
surface_treatmentOXIDE OVERALL
pin_overall_length0.719 INCHES NOMINAL IN
pin_overall_diameter0.0785 INCHES NOMINAL IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
second_end_taper_angle25.0 DEGREES NOMINAL
second_end_taper_length0.010 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-076-8221
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8445076-61 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SECOND END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
SECOND END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.0785 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 0.719 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SECOND END TAPER ANGLE25.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
SECOND END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.0785 INCHES NOMINAL IN
PIN OVERALL LENGTH0.719 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTOXIDE OVERALL
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8445076-61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8445076-61?
8445076-61 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 8445076-61?
8445076-61 is cataloged in the U.S. Government catalog under NSN 5315-01-076-8221. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8445076-61

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.