PartsTable
Technical Data Sheet
Download PDF

8444118 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8444118: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include angle: 45.0 DEGREES NOMINAL, material: STEEL COMP 4130 OVERALL, fork_depth: 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM IN, angle_height: 0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, hole_diameter: 0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, overall_width: 1.460 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-403-6854, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8444118
NSN: 5340-00-403-6854
FSC: 5340 — Hardware, Commercial
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
angle45.0 DEGREES NOMINAL
materialSTEEL COMP 4130 OVERALL
fork_depth2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM IN
angle_height0.240 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hole_diameter0.249 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
overall_width1.460 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
overall_height0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
fork_span_width1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
special_featuresADDITIONAL PIVOT HOLE DIAMETER,0.249 IN. MIN.,0.259 IN. MAX. IN
style_designatorCLEVIS
surface_treatmentPHOSPHATE OVERALL
fork_arm_thickness0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NSN5340-00-403-6854
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8444118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
FORK SPAN WIDTH1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
FORK ARM THICKNESS0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OR SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.460 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
ANGLE45.0 DEGREES NOMINAL
SPECIAL FEATURESADDITIONAL PIVOT HOLE DIAMETER,0.249 IN. MIN.,0.259 IN. MAX. IN
SURFACE TREATMENTPHOSPHATE OVERALL
ROD CONNECTION BORE DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 8444118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8444118?
8444118 is a CLEVIS,ROD END.
What is the NSN for 8444118?
8444118 is cataloged in the U.S. Government catalog under NSN 5340-00-403-6854. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8444118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.