PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 84366
84366 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, thread_direction: RIGHT-HAND, surface_treatment: ZINC OVERALL, nominal_thread_diameter: 0.250 INCHES IN, thread_quantity_per_inch: 28. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0683, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
84366
NSN: 3110-00-100-0683
FSC: 3110
CAGE: 23382 — FWD SEAGRAVE HOLDINGS LP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
thread_series_designatorUNF
material_document_and_classificationCARBON STEEL, CAGEC 90800 MFR REF SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationGALVANIZED, CAGEC 90800 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN3110-00-100-0683
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 84366 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.8375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 3.3475 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.8375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING,CONE OTR WHL
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.3475 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
END ITEM IDENTIFICATIONMRAP MAXXPRO
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
749Interchangeable
interchangeable cross-reference
interchangeable
170Interchangeable
interchangeable cross-reference
interchangeable
21FInterchangeable
interchangeable cross-reference
interchangeable
FF-B-187/01-626Interchangeable
interchangeable cross-reference
interchangeable
3110001004407Interchangeable
interchangeable cross-reference
interchangeable
00024-0036Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 84366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 84366?
84366 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 84366?
There are 30 known substitutes for 84366: 749, 170, 21F and 27 more. Substitute compatibility should be verified for your specific system.
Is 84366 still available?
84366 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 84366

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026