PartsTable
Technical Data Sheet
Download PDF

84261 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

84261: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, outside_diameter: 6.631 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.560 INCHES MINIMUM AND 2.562 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-286-6860, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
84261
NSN: 5330-00-286-6860
FSC: 5330 — Packing and Gasket Materials
CAGE: 22593 — FITZGERALD GASKET A CO OF TANNETICS INC (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
outside_diameter6.631 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.560 INCHES MINIMUM AND 2.562 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.500 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1600 FEET PER MINUTE FT
NSN5330-00-286-6860
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 84261 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 6.631 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.560 INCHES MINIMUM AND 2.562 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.500 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER6.631 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.560 INCHES MINIMUM AND 2.562 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.500 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 8
15176Reference document
Same NSN cross-reference
Reference document — Secondary reference
116256-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
50190Reference document
Same NSN cross-reference
Reference document — Secondary reference
13150Reference document
Same NSN cross-reference
Reference document — Secondary reference
00044Reference document
Same NSN cross-reference
Reference document — Secondary reference
256W116Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 84261?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 84261?
84261 is a SEAL,PLAIN ENCASED.
What parts can replace 84261?
There are 8 known substitutes for 84261: 15176, 116256-1, 50190 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 84261?
84261 is cataloged in the U.S. Government catalog under NSN 5330-00-286-6860. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 84261