PartsTable
Technical Data Sheet
Download PDF

8416-0120-23 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8416-0120-23: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: SILICONE CORE, hole_diameter: 0.196 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.470 INCHES NOMINAL IN, aperture_width: 2.470 INCHES NOMINAL IN, overall_length: 17.500 INCHES NOMINAL IN, aperture_length: 16.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-545-4060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8416-0120-23
NSN: 5330-01-545-4060
FSC: 5330 — Packing and Gasket Materials
CAGE: 30817 — LAIRD TECHNOLOGIES, INC DBA LAIRD TECHNOLOGIES (USA)
SPECIFICATIONS
materialSILICONE CORE
hole_diameter0.196 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.470 INCHES NOMINAL IN
aperture_width2.470 INCHES NOMINAL IN
overall_length17.500 INCHES NOMINAL IN
aperture_length16.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity20
outside_corner_radius0.160 INCHES NOMINAL IN
end_item_identificationAN/SPS-67(5) RADAR SET
cross-sectional_thickness0.020 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL AND NONMETALLIC MATERIALS
NSN5330-01-545-4060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8416-0120-23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: A-A-59588A ASSN STD 2ND MATERIAL RESPONSE CORE A
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND NONMETALLIC MATERIALS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.020 INCHES NOMINAL IN
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONA-A-59588A ASSN STD 2ND MATERIAL RESPONSE CORE A
MATERIAL DOCUMENT AND CLASSIFICATIONSAE AMS-4182F ASSN STD 1ST MATERIAL RESPONSE INTERNALLY MOLDED-IN REINFORCEMENT
OVERALL LENGTH17.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND NONMETALLIC MATERIALS
OVERALL WIDTH3.470 INCHES NOMINAL IN
APERTURE WIDTH2.470 INCHES NOMINAL IN
APERTURE LENGTH16.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
8-5069-01Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
8-5069Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8416-0120-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8416-0120-23?
8416-0120-23 is a GASKET.
What parts can replace 8416-0120-23?
There are 2 known substitutes for 8416-0120-23: 8-5069-01, 8-5069. Substitute compatibility should be verified for your specific system.
What is the NSN for 8416-0120-23?
8416-0120-23 is cataloged in the U.S. Government catalog under NSN 5330-01-545-4060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8416-0120-23

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.