PartsTable
Technical Data Sheet
Download PDF

8412A — 8412A

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

8412A: 8412A.

The 8412A is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, unit_type: NETWORK ANALYZER, head_style: HEXAGON, grip_length: 0.812 INCHES NOMINAL IN, head_height: 0.156 INCHES NOMINAL IN, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-151-2592, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8412A
NSN: 5306-00-151-2592
NIINs: 001512592, 001614174
FSC: 5306 — Bolts
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
unit_typeNETWORK ANALYZER
head_styleHEXAGON
grip_length0.812 INCHES NOMINAL IN
head_height0.156 INCHES NOMINAL IN
thread_class3A A
thread_length0.469 INCHES MINIMUM IN
fastener_length1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM AND DICHROMATE OVERALL
NSN5306-00-151-2592
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8412A · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.469 INCHES MINIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.156 INCHES NOMINAL IN
FASTENER LENGTH1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
THREAD LENGTH0.469 INCHES MINIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.812 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
AN174-12ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B6812Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8412A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8412A?
8412A is a 8412A. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8412A?
There are 2 known substitutes for 8412A: AN174-12A, B6812. Substitute compatibility should be verified for your specific system.
What is the NSN for 8412A?
8412A is cataloged in the U.S. Government catalog under NSN 5306-00-151-2592. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8412A