840P500 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

840P500: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: RECTANGULAR, body_width: 0.200 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.375 INCHES NOMINAL IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE, mounting_method: TERMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-040-0405, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 840P500

NSN: 5905-01-040-0405
FSC: 5905 — Resistor
CAGE: 94271 — LOCKHEED MARTIN CORP (USA)

SPECIFICATIONS

body_style	RECTANGULAR
body_width	0.200 INCHES NOMINAL IN
body_height	0.375 INCHES NOMINAL IN
body_length	0.375 INCHES NOMINAL IN
actuator_type	FLUSH DRIVE WITH SLOT-HOLE
mounting_method	TERMINAL
terminal_length	0.200 INCHES MINIMUM IN
section_quantity	1
terminal_location	RIGHT ADJACENT SIDE TWO ROWS
reliability_indicator	NOT ESTABLISHED
terminal_type_and_quantity	3 PIN
actuator_travel_control_feature	STOPS
NSN	5905-01-040-0405

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

BODY STYLE: RECTANGULAR

•

TERMINAL LENGTH: 0.200 INCHES MINIMUM IN

•

MOUNTING METHOD: TERMINAL

•

BODY WIDTH: 0.200 INCHES NOMINAL IN

•

BODY HEIGHT: 0.375 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	500.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
SECTION QUANTITY	1
BODY STYLE	RECTANGULAR
TERMINAL LENGTH	0.200 INCHES MINIMUM IN
MOUNTING METHOD	TERMINAL
BODY WIDTH	0.200 INCHES NOMINAL IN
BODY HEIGHT	0.375 INCHES NOMINAL IN
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATION	RIGHT ADJACENT SIDE TWO ROWS

SUBSTITUTES & CROSS-REFERENCES 9

63P501Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

382-0038-030Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

819-501-63Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

840P500OHM10Reference document

Same NSN cross-reference

Reference document — Secondary reference

E2A501Reference document

Same NSN cross-reference

Reference document — Secondary reference

570266Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 840P500?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 840P500?

840P500 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 840P500?

There are 9 known substitutes for 840P500: 63P501, 382-0038-030, 819-501-63 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 840P500?

840P500 is cataloged in the U.S. Government catalog under NSN 5905-01-040-0405. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

840P500 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 840P500