Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: GLUE AND PAPER OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.062 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.250 INCHES NOMINAL IN, bolt_circle_diameter: 2.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-354-3138, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
8409727
NSN:5330-00-354-3138 FSC:5330 CAGE:19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
material
GLUE AND PAPER OVERALL
hole_diameter
0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
3.062 INCHES NOMINAL IN
style_designator
NON-CIRCULAR
aperture_diameter
1.250 INCHES NOMINAL IN
bolt_hole_quantity
2
bolt_circle_diameter
2.375 INCHES NOMINAL IN
outside_corner_radius
0.344 INCHES NOMINAL IN
cross-sectional_thickness
0.031 INCHES NOMINAL IN
cross-sectional_shape_style
SOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center
0.938 INCHES NOMINAL IN
material_document_and_classification
MIL-G-12803 F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-354-3138
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
OUTSIDE CORNER RADIUS: 0.344 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.938 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.250 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER
2.375 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS
0.031 INCHES NOMINAL IN
BOLT HOLE QUANTITY
2
OUTSIDE CORNER RADIUS
0.344 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER
0.938 INCHES NOMINAL IN
APERTURE DIAMETER
1.250 INCHES NOMINAL IN
HOLE DIAMETER
0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-G-12803 F326128-6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL