PartsTable
Technical Data Sheet
Download PDF

8406206 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8406206: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN, material: PLASTIC EPOXY CUSHION, overall_width: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE ZINC BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-302-9978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8406206
NSN: 5340-01-302-9978
FSC: 5340 — Hardware, Commercial
CAGE: 1YHH8 — JLG INDUSTRIES, INC. (USA)
SPECIFICATIONS
diameter0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
materialPLASTIC EPOXY CUSHION
overall_width0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE ZINC BAND
material_thickness0.044 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
loop_inside_diameter0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end2.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
NSN5340-01-302-9978
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8406206 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.044 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE ZINC BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
OVERALL WIDTH0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
MATERIAL THICKNESS0.044 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.250 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE ZINC BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN
MATERIALPLASTIC EPOXY CUSHION
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8406206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8406206?
8406206 is a CLAMP,LOOP.
What is the NSN for 8406206?
8406206 is cataloged in the U.S. Government catalog under NSN 5340-01-302-9978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8406206

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.