PartsTable
Technical Data Sheet
Download PDF

840605 — NETWORK,SPECIAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

840605: NETWORK,SPECIAL.

The NETWORK,SPECIAL is a the manufacturer industrial component. Key specifications include length: 0.625 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, style_designator: INTERNALLY THREADED FULL LENGTH, surface_treatment: CADMIUM AND CHROMATE OVERALL, width_across_flats: 0.250 INCHES NOMINAL IN, cross-sectional_shape: HEXAGON. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-492-0588, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 840605
NSN: 5340-00-492-0588
NIINs: 004920588, 010426781
FSC: 5340 — Hardware, Commercial
CAGE: 66943 — DATRON WORLD COMMUNICATIONS, INC. (USA)
SPECIFICATIONS
length0.625 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
style_designatorINTERNALLY THREADED FULL LENGTH
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.250 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
NSN5340-00-492-0588
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 840605 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
LENGTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
CROSS-SECTIONAL SHAPEHEXAGON
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
KAD10-029Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
403-9055Reference document
Same NSN cross-reference
Reference document — Informative reference only
1451DSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8217B0632-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
8217B0632&3BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 840605?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 840605?
840605 is a NETWORK,SPECIAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 840605?
There are 5 known substitutes for 840605: KAD10-029, 403-9055, 1451D and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 840605?
840605 is cataloged in the U.S. Government catalog under NSN 5340-00-492-0588. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 840605