8403340: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN, diameter: 0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN, head_style: FLAT CHAMFER, chamfer_length: 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, style_designator: STRAIGHT, pin_chamfer_angle: 15.0 DEGREES NOMINAL. This part is cataloged in the U.S.
Government catalog under NSN 5315-00-652-5557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| diameter | 0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN |
| material | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1025 OR STEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OVERALL |
| head_style | FLAT CHAMFER |
| chamfer_length | 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN |
| style_designator | STRAIGHT |
| pin_chamfer_angle | 15.0 DEGREES NOMINAL |
| pin_head_diameter | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| surface_treatment | ZINC AND CHROMATE OVERALL |
| under_head_length | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN |
| first_hole_diameter | 0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN |
| hole_arrangement_style | ONE END DRILLED |
| NSN | 5315-00-652-5557 |
| CHAMFER LENGTH | 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| FIRST HOLE DIAMETER | 0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A108 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A108 ASSN STD 3RD MATERIAL RESPONSE OR ASTM A108 ASSN STD 4TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-637 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 7TH MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.