PartsTable
Technical Data Sheet
Download PDF

84000096 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

84000096: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, height: 0.062 INCHES NOMINAL IN, length: 0.500 INCHES NOMINAL IN, material: ALUMINUM ALLOY 5052, hole_diameter: 0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-411-9373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
84000096
NSN: 5340-00-411-9373
FSC: 5340 — Hardware, Commercial
CAGE: 42470 — NCR CORPORATION DBA NCR (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
height0.062 INCHES NOMINAL IN
length0.500 INCHES NOMINAL IN
materialALUMINUM ALLOY 5052
hole_diameter0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
special_featuresTWO MOUNTING HOLES ON 0.500 IN. C TO C DISTANCE IN
material_document_and_classificationQQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-411-9373
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 84000096 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.062 INCHES NOMINAL IN
•
WIDTH: 0.875 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5052
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
HEIGHT0.062 INCHES NOMINAL IN
SPECIAL FEATURESTWO MOUNTING HOLES ON 0.500 IN. C TO C DISTANCE IN
WIDTH0.875 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5052
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.129 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 84000096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 84000096?
84000096 is a CLAMP,SYNCHRO.
What is the NSN for 84000096?
84000096 is cataloged in the U.S. Government catalog under NSN 5340-00-411-9373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 84000096