PartsTable
Technical Data Sheet
Download PDF

838732-6 — STUD,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

838732-6: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL, design_type: SOLID, end_diameter: 0.6770 INCHES NOMINAL IN, bore_diameter: 0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM IN, overall_height: 0.2810 INCHES NOMINAL IN, special_features: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-895-3677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
838732-6
NSN: 5340-00-895-3677
NIINs: 008953677, 014507574
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
design_typeSOLID
end_diameter0.6770 INCHES NOMINAL IN
bore_diameter0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM IN
overall_height0.2810 INCHES NOMINAL IN
special_featuresNOT CASEHARDENED
style_designatorSEAT
first_step_diameter1.1250 INCHES NOMINAL IN
distance_from_end_to_first_step0.2270 INCHES NOMINAL IN
NSN5340-00-895-3677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 838732-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST STEP DIAMETER: 1.1250 INCHES NOMINAL IN
•
END DIAMETER: 0.6770 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST STEP: 0.2270 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
STYLE DESIGNATOR: SEAT
•
BORE DIAMETER: 0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.2810 INCHES NOMINAL IN
FIRST STEP DIAMETER1.1250 INCHES NOMINAL IN
END DIAMETER0.6770 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST STEP0.2270 INCHES NOMINAL IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
SPECIAL FEATURESNOT CASEHARDENED
BORE DIAMETER0.6700 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 838732-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 838732-6?
838732-6 is a STUD,PLAIN.
What is the NSN for 838732-6?
838732-6 is cataloged in the U.S. Government catalog under NSN 5340-00-895-3677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 838732-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.