PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 838-736-041
838-736-041 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, aperture_width: 9.000 INCHES NOMINAL IN, aperture_length: 16.000 INCHES NOMINAL IN, bolt_hole_quantity: 24, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-3874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
838-736-041
NSN: 5330-01-208-3874
FSC: 5330
CAGE: 830R7 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORP DIV FLEET SOLUTIONS (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
aperture_width9.000 INCHES NOMINAL IN
aperture_length16.000 INCHES NOMINAL IN
bolt_hole_quantity24
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-01-208-3874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 838-736-041 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 16.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
BOLT HOLE QUANTITY: 24
•
MATERIAL: PAPER AND GLUE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE WIDTH: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH16.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
BOLT HOLE QUANTITY24
MATERIALPAPER AND GLUE OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE WIDTH9.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
38736Interchangeable
interchangeable cross-reference
interchangeable
38770Interchangeable
interchangeable cross-reference
interchangeable
C38736Interchangeable
interchangeable cross-reference
interchangeable
2R-545-88Interchangeable
Same NIIN cross-reference
interchangeable
2R-711-88Interchangeable
Same NIIN cross-reference
interchangeable
2R-544 PIECE 88Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 838-736-041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 838-736-041?
838-736-041 is a GASKET.
What parts can replace 838-736-041?
There are 6 known substitutes for 838-736-041: 38736, 38770, C38736 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 838-736-041?
838-736-041 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-208-3874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 838-736-041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026