PartsTable
Technical Data Sheet
Download PDF

8379897 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8379897: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN, surface_treatment: CADMIUM CASE, housing_bore_diameter: 2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN, sealing_element_style: VERTICAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-652-6284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8379897
NSN: 5330-00-652-6284
FSC: 5330 — Packing and Gasket Materials
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
surface_treatmentCADMIUM CASE
housing_bore_diameter2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter1.156 INCHES NOMINAL IN
criticality_code_justificationCPCW
NSN5330-00-652-6284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8379897 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
CRITICALITY CODE JUSTIFICATION: CPCW
•
HOUSING BORE DIAMETER: 2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.156 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
CRITICALITY CODE JUSTIFICATIONCPCW
HOUSING BORE DIAMETER2.440 INCHES MINIMUM AND 2.442 INCHES MAXIMUM IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.156 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
11575Reference document
Same NSN cross-reference
Reference document — Secondary reference
24415TYPEPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8379897?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8379897?
8379897 is a SEAL,PLAIN ENCASED.
What parts can replace 8379897?
There are 2 known substitutes for 8379897: 11575, 24415TYPEP. Substitute compatibility should be verified for your specific system.
What is the NSN for 8379897?
8379897 is cataloged in the U.S. Government catalog under NSN 5330-00-652-6284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8379897