PartsTable
Technical Data Sheet
Download PDF

8376200 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8376200: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.125 INCHES NOMINAL IN, length: 3.000 INCHES NOMINAL IN, material: STEEL OVERALL, loop_height: 0.688 INCHES NOMINAL IN, loop_radius: 2.125 INCHES NOMINAL IN, hole_diameter: 0.513 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-034-8835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8376200
NSN: 5340-00-034-8835
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width1.125 INCHES NOMINAL IN
length3.000 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_height0.688 INCHES NOMINAL IN
loop_radius2.125 INCHES NOMINAL IN
hole_diameter0.513 INCHES NOMINAL IN
material_thickness0.0299 INCHES NOMINAL IN
NSN5340-00-034-8835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8376200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 3.000 INCHES NOMINAL IN
•
LOOP RADIUS: 2.125 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0299 INCHES NOMINAL IN
•
WIDTH: 1.125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.513 INCHES NOMINAL IN
•
LOOP HEIGHT: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH3.000 INCHES NOMINAL IN
LOOP RADIUS2.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.0299 INCHES NOMINAL IN
WIDTH1.125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.513 INCHES NOMINAL IN
LOOP HEIGHT0.688 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
079127Reference document
Same NSN cross-reference
Reference document — Secondary reference
R20901Reference document
Same NSN cross-reference
Reference document — Secondary reference
GP7799Reference document
Same NSN cross-reference
Reference document — Secondary reference
A970Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
97Q9Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8376200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8376200?
8376200 is a CLIP,SPRING TENSION.
What parts can replace 8376200?
There are 5 known substitutes for 8376200: 079127, R20901, GP7799 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8376200?
8376200 is cataloged in the U.S. Government catalog under NSN 5340-00-034-8835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8376200

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.