PartsTable / COMPONENT / 835980-00
835980-00
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-290-0757, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
835980-00
NSN: 5340-00-290-0757 FSC: 5340 CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
diameter 0.203 INCHES NOMINAL IN material PLASTIC POLYAMIDE NYLON BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.060 INCHES NOMINAL IN loop_inside_diameter 0.875 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 1.048 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.845 INCHES NOMINAL IN NSN 5340-00-290-0757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 835980-00
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• LOOP INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
• STYLE DESIGNATOR: SINGLE LOOP
• MATERIAL: PLASTIC POLYAMIDE NYLON BAND
• DIAMETER: 0.203 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.845 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER 0.875 INCHES NOMINAL IN STYLE DESIGNATOR SINGLE LOOP MATERIAL PLASTIC POLYAMIDE NYLON BAND DIAMETER 0.203 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL THICKNESS 0.060 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.845 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED DISTANCE FROM LOOP CENTER TO TONGUE END 1.048 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
782 Upgraded Successor successor cross-reference
successor
9416649 Interchangeable interchangeable cross-reference
interchangeable
5553209 Interchangeable interchangeable cross-reference
interchangeable
FFB187/01-702 Interchangeable interchangeable cross-reference
interchangeable
52-C-49 1/2 Interchangeable interchangeable cross-reference
interchangeable
846-50 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 835980-00?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 835980-00?
835980-00 is a CLAMP,LOOP.
What parts can replace 835980-00?
There are 28 known substitutes for 835980-00: 782, 9416649, 5553209 and 25 more. Substitute compatibility should be verified for your specific system.
Is 835980-00 still available?
835980-00 is currently cancelled.
Request a Quote — 835980-00