83572 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

83572: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL COMP 302 OVERALL, first_end_style: RADIUS, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN, pin_overall_diameter: 0.0610 INCHES MINIMUM AND 0.0630 INCHES MAXIMUM IN, first_end_corner_radius: 0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-143-7538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

83572

NSN: 3110-00-143-7538
NIINs: 001437538, 008140712, 013954653
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)

SPECIFICATIONS

material	STEEL COMP 302 OVERALL
first_end_style	RADIUS
surface_treatment	PASSIVATE OVERALL
pin_overall_length	0.845 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
pin_overall_diameter	0.0610 INCHES MINIMUM AND 0.0630 INCHES MAXIMUM IN
first_end_corner_radius	0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
material_document_and_classification	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_end	IDENTICAL
NSN	3110-00-143-7538

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: NORMAL ANGLE

•

CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN

•

CONE WIDTH: 1.1875 INCHES NOMINAL IN

•

STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2

•

BORE DIAMETER: 2.6250 INCHES NOMINAL IN

•

MATERIAL: STEEL OVERALL

TYPICAL APPLICATIONS

Long-term data archival and compliance retention
Offsite backup and disaster recovery
Air-gapped ransomware protection
Cold storage tier for infrequently accessed data

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	NORMAL ANGLE
CONE CORNER RADIUS	0.1406 INCHES NOMINAL IN
CONE WIDTH	1.1875 INCHES NOMINAL IN
SPECIAL FEATURES	AXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE AND CONE STABILITY POINT ON SHAFT AXIS 0.2600 IN. IN
STANDARD TOLERANCE DESIGNATION	AFBMA CLASS 2
BORE DIAMETER	2.6250 INCHES NOMINAL IN
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 9

3K3036Reference document

Same NSN cross-reference

Reference document — Secondary reference

FF-B-187/01-493Reference document

Same NSN cross-reference

Reference document — Secondary reference

9-049-103801Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

50120Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

233273Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

9414175Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 83572?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 83572?

83572 is a CONE AND ROLLERS,TAPERED ROLLER.

What parts can replace 83572?

There are 9 known substitutes for 83572: 3K3036, FF-B-187/01-493, 9-049-103801 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 83572?

83572 is cataloged in the U.S. Government catalog under NSN 3110-00-143-7538. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

83572 — CONE AND ROLLERS,TAPERED ROLLER

Request a Quote — 83572