PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 835447
835447 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8503, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
835447
NSN: 5340-00-200-8503
FSC: 5340
CAGE: 19203 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV US ARMY RESEARCH, DEVELOPMENT AND ENGINEERING COMMAND ARMAMENT (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.500 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.795 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.592 INCHES NOMINAL IN
NSN5340-00-200-8503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 835447 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC BAND
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.592 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC BAND
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.795 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
710876-008Upgraded Successor
successor cross-reference
successor
PP7Upgraded Successor
successor cross-reference
successor
MS25281R8Upgraded Successor
successor cross-reference
successor
TYPE612Interchangeable
interchangeable cross-reference
interchangeable
GGGR180TYPE10CLASS1STYLEBGRADEAInterchangeable
interchangeable cross-reference
interchangeable
8599093-008Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 835447?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 835447?
835447 is a CLAMP,LOOP.
What parts can replace 835447?
There are 9 known substitutes for 835447: 710876-008, PP7, MS25281R8 and 6 more. Substitute compatibility should be verified for your specific system.
Is 835447 still available?
835447 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 835447

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026