PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8352679
8352679 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.531 INCHES NOMINAL IN, material: STEEL BAND, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM OR ZINC BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-421-7254, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8352679
NSN: 5340-00-421-7254
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.531 INCHES NOMINAL IN
materialSTEEL BAND
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM OR ZINC BAND
material_thickness0.027 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.079 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.641 INCHES NOMINAL IN
NSN5340-00-421-7254
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8352679 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CUSHION
•
SURFACE TREATMENT: CADMIUM OR ZINC BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.531 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.641 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CUSHION
SURFACE TREATMENTCADMIUM OR ZINC BAND
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.531 INCHES NOMINAL IN
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.641 INCHES NOMINAL IN
MATERIAL THICKNESS0.027 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.079 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
10304DAPInterchangeable
interchangeable cross-reference
interchangeable
7717-7DAPBLKInterchangeable
interchangeable cross-reference
interchangeable
332775-1Interchangeable
interchangeable cross-reference
interchangeable
T1117Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8352679?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8352679?
8352679 is a CLAMP,LOOP.
What parts can replace 8352679?
There are 4 known substitutes for 8352679: 10304DAP, 7717-7DAPBLK, 332775-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8352679?
8352679 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-421-7254. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8352679

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026