PartsTable
Technical Data Sheet

8352-1 — Cable Assembly Specs

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include length: 16.480 INCHES NOMINAL IN, trade_size: 1.500, body_length: 0.875 INCHES NOMINAL IN, body_diameter: 0.312 INCHES NOMINAL IN, cubic_measure: 0.063 CUBIC INCHES, overall_width: 2.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5998-00-783-6107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8352-1
NSN: 5998-00-783-6107
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 04274 — ROSEMOUNT INC DBA FISHER ROSEMOUNT SERVICE AND SUPPORT (USA)
SPECIFICATIONS
length16.480 INCHES NOMINAL IN
trade_size1.500
body_length0.875 INCHES NOMINAL IN
body_diameter0.312 INCHES NOMINAL IN
cubic_measure0.063 CUBIC INCHES
overall_width2.625 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
overall_height0.250 INCHES NOMINAL IN
overall_length3.650 INCHES NOMINAL IN
inside_diameter0.075 INCHES NOMINAL IN
terminal_length1.500 INCHES MINIMUM IN
NSN5998-00-783-6107
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 8352-1 MFR RESISTOR,FIXED,WIRE WOUND,INDUCT
TECHNICAL CHARACTERISTICS
PART NAME ASSIGNED BY CONTROLLING AGENCYFSC APPLICATION DATA:TRANSMITTER,PRESSURE,EXCEPT ENGINE
OVERALL LENGTH3.650 INCHES NOMINAL IN
OVERALL WIDTH2.625 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 22; CHOKE 4; DIODE 6; RESISTOR 16; TERMINAL BOARD 1; TRANSFORMER 1; TRANSISTOR 2
OVERALL HEIGHT0.250 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYFSC APPLICATION DATA:TRANSMITTER,PRESSURE,EXCEPT ENGINE
OVERALL LENGTH3.650 INCHES NOMINAL IN
OVERALL WIDTH2.625 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 22; CHOKE 4; DIODE 6; RESISTOR 16; TERMINAL BOARD 1; TRANSFORMER 1; TRANSISTOR 2
OVERALL HEIGHT0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
15SF24InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
713418InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
15SBB24InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-PRF-39007/6InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
RWR74S1401FRInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
RWR74S1401FSInterchangeableGOVERNMENT REGISTRY
Resistor,fixed,wire Wound,induct
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMATSourcing: other
Ready to buy 8352-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8352-1?
8352-1 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8352-1?
There are 6 known substitutes for 8352-1: 15SF24, 713418, 15SBB24 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8352-1?
8352-1 is cataloged in the Federal Logistics Information System under NSN 5998-00-783-6107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8352-1