PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 834918-00
834918-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, special_features: COLOR YELLOW, inside_diameter_length: 0.625 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 1.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-236-2090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
834918-00
NSN: 5340-01-236-2090
FSC: 5340
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
special_featuresCOLOR YELLOW
inside_diameter_length0.625 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed1.062 INCHES NOMINAL IN
NSN5340-01-236-2090
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 834918-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.062 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCOLOR YELLOW
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
MATERIALPLASTIC VINYL
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.062 INCHES NOMINAL IN
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
C230Upgraded Successor
successor cross-reference
successor
6230XInterchangeable
interchangeable cross-reference
interchangeable
72-6970-266Interchangeable
interchangeable cross-reference
interchangeable
150BC02Interchangeable
interchangeable cross-reference
interchangeable
33518Interchangeable
interchangeable cross-reference
interchangeable
33435Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 834918-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 834918-00?
834918-00 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 834918-00?
There are 11 known substitutes for 834918-00: C230, 6230X, 72-6970-266 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 834918-00?
834918-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-236-2090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 834918-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026