PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 833528
833528 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

VALVE,LINEAR,DIRECTIONAL CONTROL. Key specifications include special_features: W/WET ARMATURE TYPE SOLENOID;MAX FLOW 10 GPM AT 5000 PSI;SPOOL IS SPRING OFFSET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-061-1831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
833528
NSN: 5340-00-061-1831
FSC: 5340
CAGE: 09786 — ORDNANCE SUPPLY OFFICE (USA)
SPECIFICATIONS
special_featuresW/WET ARMATURE TYPE SOLENOID;MAX FLOW 10 GPM AT 5000 PSI;SPOOL IS SPRING OFFSET
NSN5340-00-061-1831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 833528 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.745 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: CAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.745 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
MATERIAL DOCUMENT AND CLASSIFICATIONCAGE 99193, EMS53109 MFR REF SINGLE MATERIAL RESPONSE
SPECIAL FEATURESCOLOR YELLOW
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
L2-DG4-S5-016A-Interchangeable
interchangeable cross-reference
interchangeable
833528Interchangeable
interchangeable cross-reference
interchangeable
L2DG4S5-012AH41Interchangeable
interchangeable cross-reference
interchangeable
100625Interchangeable
interchangeable cross-reference
interchangeable
920012-19Interchangeable
interchangeable cross-reference
interchangeable
13614Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 833528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 833528?
833528 is a VALVE,LINEAR,DIRECTIONAL CONTROL.
What parts can replace 833528?
There are 14 known substitutes for 833528: L2-DG4-S5-016A-, 833528, L2DG4S5-012AH41 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 833528?
833528 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-061-1831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 833528

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026