PartsTable
Technical Data Sheet
Download PDF

8333625 — STUD,PLAIN

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

8333625: STUD,PLAIN.

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035, thread_class: 3A NUT THREAD A, thread_length: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM STUD THREAD IN, overall_length: 2.000 INCHES NOMINAL IN, hardness_rating: 11.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM, thread_direction: RIGHT-HAND NUT THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5307-00-207-2642, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8333625
NSN: 5307-00-207-2642
FSC: 5307 — Studs
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1035
thread_class3A NUT THREAD A
thread_length0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM STUD THREAD IN
overall_length2.000 INCHES NOMINAL IN
hardness_rating11.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND NUT THREAD
nominal_thread_size0.625 INCHES STUD THREAD IN
thread_pitch_diameters+0.5680 TO 0.5710 INCHES STUD THREAD IN
thread_quantity_per_inch11 STUD THREAD
thread_series_designatorUNF NUT THREAD
material_document_and_classificationQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
NSN5307-00-207-2642
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 8333625 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM STUD THREAD IN
•
HARDNESS RATING: 11.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM
•
THREAD PITCH DIAMETERS: +0.5680 TO 0.5710 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD DIRECTION: RIGHT-HAND STUD THREAD
TECHNICAL CHARACTERISTICS
THREAD LENGTH0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM STUD THREAD IN
THREAD LENGTH0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM NUT THREAD IN
HARDNESS RATING11.0 ROCKWELL C MINIMUM AND 25.0 ROCKWELL C MAXIMUM
THREAD PITCH DIAMETERS+0.5680 TO 0.5710 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH2.000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
NOMINAL THREAD SIZE0.625 INCHES NUT THREAD IN
NOMINAL THREAD SIZE0.625 INCHES STUD THREAD IN
SUBSTITUTES & CROSS-REFERENCES 2
330158Reference document
Same NSN cross-reference
Reference document — Secondary reference
5307002072642Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8333625?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8333625?
8333625 is a STUD,PLAIN.
What parts can replace 8333625?
There are 2 known substitutes for 8333625: 330158, 5307002072642. Substitute compatibility should be verified for your specific system.
What is the NSN for 8333625?
8333625 is cataloged in the U.S. Government catalog under NSN 5307-00-207-2642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8333625

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.