PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8333614
8333614 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 20.0 MICROINCHES SHANK END, first_end_style: CHAMFERED, hardness_rating: 81.0 ROCKWELL A MINIMUM AND 84.0 ROCKWELL A MAXIMUM OVERALL, second_end_style: ROUND, features_provided: CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-598-7115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8333614
NSN: 5315-00-598-7115
FSC: 5315
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish20.0 MICROINCHES SHANK END
first_end_styleCHAMFERED
hardness_rating81.0 ROCKWELL A MINIMUM AND 84.0 ROCKWELL A MAXIMUM OVERALL
second_end_styleROUND
features_providedCASEHARDENED
pin_overall_length0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
pin_overall_diameter0.4376 INCHES MINIMUM AND 0.4378 INCHES MAXIMUM IN
first_end_taper_angle3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
first_end_taper_length0.087 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
second_end_outer_radius0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-598-7115
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8333614 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
MATERIAL: STEEL OVERALL
•
SECOND END OUTER RADIUS: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.087 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
HARDNESS RATING: 81.0 ROCKWELL A MINIMUM AND 84.0 ROCKWELL A MAXIMUM OVERALL
•
FEATURES PROVIDED: CASEHARDENED
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL DIAMETER: 0.4376 INCHES MINIMUM AND 0.4378 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
MATERIALSTEEL OVERALL
SECOND END OUTER RADIUS0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.087 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
HARDNESS RATING81.0 ROCKWELL A MINIMUM AND 84.0 ROCKWELL A MAXIMUM OVERALL
FEATURES PROVIDEDCASEHARDENED
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.4376 INCHES MINIMUM AND 0.4378 INCHES MAXIMUM IN
FIRST END TAPER ANGLE3.0 DEGREES MINIMUM AND 7.0 DEGREES MAXIMUM
SECOND END STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
F342-7607430Interchangeable
interchangeable cross-reference
interchangeable
7607430Interchangeable
interchangeable cross-reference
interchangeable
17475Interchangeable
interchangeable cross-reference
interchangeable
60AInterchangeable
interchangeable cross-reference
interchangeable
4L620Interchangeable
interchangeable cross-reference
interchangeable
A60SCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8333614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8333614?
8333614 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 8333614?
There are 14 known substitutes for 8333614: F342-7607430, 7607430, 17475 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8333614?
8333614 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-598-7115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8333614

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026