PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8333215
8333215 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, center_hole_diameter: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-699-8560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8333215
NSN: 5330-00-699-8560
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
center_hole_diameter0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
NSN5330-00-699-8560
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8333215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEO-RING
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6487Interchangeable
interchangeable cross-reference
interchangeable
PI1011Interchangeable
interchangeable cross-reference
interchangeable
53X2923Interchangeable
interchangeable cross-reference
interchangeable
2HCP250AInterchangeable
interchangeable cross-reference
interchangeable
6487B-G501Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8333215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8333215?
8333215 is a PACKING,PREFORMED.
What parts can replace 8333215?
There are 5 known substitutes for 8333215: 6487, PI1011, 53X2923 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8333215?
8333215 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-699-8560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8333215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026