PartsTable
Technical Data Sheet
Download PDF

8332580 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8332580: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYCAPROLACTAM OVERALL, tab_width: 0.067 INCHES NOMINAL IN, groove_depth: 0.100 INCHES NOMINAL IN, groove_width: 0.131 INCHES NOMINAL IN, grommet_style: EDGING, overall_width: 0.155 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-318-4290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8332580
NSN: 5330-00-318-4290
NIINs: 003184290, 009477069
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC POLYCAPROLACTAM OVERALL
tab_width0.067 INCHES NOMINAL IN
groove_depth0.100 INCHES NOMINAL IN
groove_width0.131 INCHES NOMINAL IN
grommet_styleEDGING
overall_width0.155 INCHES NOMINAL IN
overall_height0.220 INCHES NOMINAL IN
width_between_tabs0.067 INCHES NOMINAL IN
grommet_overall_length12.620 INCHES MINIMUM AND 12.750 INCHES MAXIMUM IN
grommet_construction_typeSPLIT
NSN5330-00-318-4290
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8332580 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.688 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 3.192 INCHES MINIMUM AND 3.196 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.188 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.688 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER3.192 INCHES MINIMUM AND 3.196 INCHES MAXIMUM IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.188 INCHES NOMINAL IN
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 2
1402618Reference document
Same NSN cross-reference
Reference document — Secondary reference
18405AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 8332580?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8332580?
8332580 is a SEAL,PLAIN ENCASED.
What parts can replace 8332580?
There are 2 known substitutes for 8332580: 1402618, 18405A. Substitute compatibility should be verified for your specific system.
What is the NSN for 8332580?
8332580 is cataloged in the U.S. Government catalog under NSN 5330-00-318-4290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8332580