PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 833-9
833-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOX CONNECTOR,ELECTRICAL is a the manufacturer industrial component. Key specifications include color: RED, width: 30.000 INCHES NOMINAL IN, end_type: EXTERNAL THREAD SECOND END, material: PLASTIC POLYESTER, nut_style: HEXAGON, nut_height: 0.531 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-043-0284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
833-9
NSN: 5330-00-043-0284
FSC: 5330
CAGE: 60674 — MICROWAVE DEVICES INC (USA)
SPECIFICATIONS
colorRED
width30.000 INCHES NOMINAL IN
end_typeEXTERNAL THREAD SECOND END
materialPLASTIC POLYESTER
nut_styleHEXAGON
nut_height0.531 INCHES NOMINAL IN
design_typeBAG
thread_class2B
thread_seriesUN
furnished_itemsBUSHING AND GLAND WASHER
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
deflection_angle90.0 DEGREES
NSN5330-00-043-0284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 833-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
COLOR: RED
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765,CL 2A,GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
COLORRED
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL HEIGHT0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765,CL 2A,GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
MATERIALRUBBER SILICONE CLASS Q OVERALL
CROSS-SECTIONAL SHAPE STYLEU
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
42308Interchangeable
interchangeable cross-reference
interchangeable
242308Interchangeable
interchangeable cross-reference
interchangeable
2273871Interchangeable
interchangeable cross-reference
interchangeable
5M2158-001Interchangeable
interchangeable cross-reference
interchangeable
SR9-504Interchangeable
interchangeable cross-reference
interchangeable
1836Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 833-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 833-9?
833-9 is a BOX CONNECTOR,ELECTRICAL.
What parts can replace 833-9?
There are 10 known substitutes for 833-9: 42308, 242308, 2273871 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 833-9?
833-9 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-043-0284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 833-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026