PartsTable
Technical Data Sheet
Download PDF

8329737 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8329737: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.620 INCHES NOMINAL IN, length: 1.4639 INCHES NOMINAL IN, hole_diameter: 0.340 INCHES NOMINAL IN, loop_opening_width: 0.410 INCHES NOMINAL IN, material_thickness: 0.0239 INCHES NOMINAL IN, loop/holding_dimension: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-333-6079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8329737
NSN: 5340-00-333-6079
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.620 INCHES NOMINAL IN
length1.4639 INCHES NOMINAL IN
hole_diameter0.340 INCHES NOMINAL IN
loop_opening_width0.410 INCHES NOMINAL IN
material_thickness0.0239 INCHES NOMINAL IN
loop/holding_dimension0.500 INCHES NOMINAL IN
NSN5340-00-333-6079
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8329737 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.4639 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0239 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.410 INCHES NOMINAL IN
•
WIDTH: 0.620 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.340 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.4639 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.0239 INCHES NOMINAL IN
LOOP OPENING WIDTH0.410 INCHES NOMINAL IN
WIDTH0.620 INCHES NOMINAL IN
HOLE DIAMETER0.340 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
807201Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 8329737?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8329737?
8329737 is a CLIP,SPRING TENSION.
What parts can replace 8329737?
There is 1 known substitute for 8329737: 807201. Substitute compatibility should be verified for your specific system.
What is the NSN for 8329737?
8329737 is cataloged in the U.S. Government catalog under NSN 5340-00-333-6079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8329737