PartsTable
Technical Data Sheet
Download PDF

8328335 — FELT,MECHANICAL,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8328335: FELT,MECHANICAL,PREFORMED.

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL OVERALL, joint_type: BUTT PACKING, outside_diameter: 1.438 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 1.031 INCHES NOMINAL IN, cross-sectional_width: 0.2035 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-290-1419, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8328335
NSN: 5330-00-290-1419
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialWOOL OVERALL
joint_typeBUTT PACKING
outside_diameter1.438 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter1.031 INCHES NOMINAL IN
cross-sectional_width0.2035 INCHES NOMINAL IN
cross-sectional_height0.032 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
NSN5330-00-290-1419
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8328335 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.032 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.2035 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 1.438 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.031 INCHES NOMINAL IN
•
MATERIAL: WOOL OVERALL
•
JOINT TYPE: BUTT PACKING
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.032 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.2035 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER1.438 INCHES NOMINAL IN
APERTURE DIAMETER1.031 INCHES NOMINAL IN
MATERIALWOOL OVERALL
JOINT TYPEBUTT PACKING
SUBSTITUTES & CROSS-REFERENCES 2
2154P2Reference document
Same NSN cross-reference
Reference document — Secondary reference
915610Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 8328335?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8328335?
8328335 is a FELT,MECHANICAL,PREFORMED.
What parts can replace 8328335?
There are 2 known substitutes for 8328335: 2154P2, 915610. Substitute compatibility should be verified for your specific system.
What is the NSN for 8328335?
8328335 is cataloged in the U.S. Government catalog under NSN 5330-00-290-1419. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8328335