PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8326-1G
8326-1G ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.4375 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN, overall_width: 0.4345 INCHES MINIMUM AND 0.4405 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: UNGROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8326-1G
NSN: 3110-00-159-9089
FSC: 3110
CAGE: 24299 — GAF CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.4375 INCHES MINIMUM AND 0.4425 INCHES MAXIMUM IN
overall_width0.4345 INCHES MINIMUM AND 0.4405 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishUNGROUND
outer_ring_width0.3750 INCHES NOMINAL IN
special_featuresINNER OR OUTER RING COMPOSED OF 2 OR MORE PARTS
style_designatorRADIAL-THRUST, L-SHAPED OUTER RING WITH FLANGED BAND, SOLID INNER RING EXTENDED ON FLANGE SIDE, NON-SEPARABLE
flange_outside_diameter1.1875 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
outer_ring_outside_diameter1.0605 INCHES MINIMUM AND 1.0645 INCHES MAXIMUM IN
NSN3110-00-159-9089
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 8326-1G · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING OUTSIDE DIAMETER: 1.0605 INCHES MINIMUM AND 1.0645 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: RADIAL-THRUST, L-SHAPED OUTER RING WITH FLANGED BAND, SOLID INNER RING EXTENDED ON FLANGE SIDE, NON-SEPARABLE
•
SURFACE FINISH: UNGROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING OUTSIDE DIAMETER1.0605 INCHES MINIMUM AND 1.0645 INCHES MAXIMUM IN
SPECIAL FEATURESINNER OR OUTER RING COMPOSED OF 2 OR MORE PARTS
MATERIALSTEEL OVERALL
STYLE DESIGNATORRADIAL-THRUST, L-SHAPED OUTER RING WITH FLANGED BAND, SOLID INNER RING EXTENDED ON FLANGE SIDE, NON-SEPARABLE
SURFACE FINISHUNGROUND
BORE SHAPESTRAIGHT
OVERALL WIDTH0.4345 INCHES MINIMUM AND 0.4405 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
FLANGE OUTSIDE DIAMETER1.1875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
F25-0Interchangeable
Coil Heater 208V
interchangeable
EC8000BPCF250Interchangeable
interchangeable cross-reference
interchangeable
1251816Interchangeable
interchangeable cross-reference
interchangeable
BA326UInterchangeable
interchangeable cross-reference
interchangeable
G016326YQInterchangeable
interchangeable cross-reference
interchangeable
40388Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8326-1G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8326-1G?
8326-1G is a BEARING,BALL,ANNULAR.
What parts can replace 8326-1G?
There are 14 known substitutes for 8326-1G: F25-0, EC8000BPCF250, 1251816 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8326-1G?
8326-1G is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-159-9089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8326-1G

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026