PartsTable
Technical Data Sheet
Download PDF

83217M5 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

83217M5: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E9310 OVERALL, body_style: WEBBED, OFFSET, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 5.6363 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-118-3756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
83217M5
NSN: 3020-00-118-3756
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP E9310 OVERALL
body_styleWEBBED, OFFSET, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter5.6363 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity62
hardness_rating30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
style_designatorRECESSED HUBS
face_nominal_width0.4800 INCHES IN
hub_nominal_diameter1.905 INCHES BOTH ENDS IN
hub_style_designatorPLAIN BOTH ENDS
NSN3020-00-118-3756
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 83217M5 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 1.500 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 1.905 INCHES BOTH ENDS IN
•
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END: 0.240 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 62
•
BODY STYLE: WEBBED, OFFSET, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: RECESSED HUBS
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER1.500 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER1.905 INCHES BOTH ENDS IN
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END0.240 INCHES BOTH ENDS IN
TEETH QUANTITY62
BODY STYLEWEBBED, OFFSET, SOLID
BORE STYLEPLAIN BOTH ENDS
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORRECESSED HUBS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER5.6363 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
83217Reference document
Same NSN cross-reference
Reference document — Secondary reference
83217M10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 83217M5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83217M5?
83217M5 is a GEAR,SPUR.
What parts can replace 83217M5?
There are 2 known substitutes for 83217M5: 83217, 83217M10. Substitute compatibility should be verified for your specific system.
What is the NSN for 83217M5?
83217M5 is cataloged in the U.S. Government catalog under NSN 3020-00-118-3756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83217M5