PartsTable
Technical Data Sheet
Download PDF

831536-00 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

831536-00: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: FRICTION, overall_height: 0.560 INCHES NOMINAL IN, overall_diameter: 1.524 INCHES NOMINAL IN, special_features: COLOR IS RED, part_name_assigned_by_controlling_agency: COVER,ELECTRICAL CONNECTOR. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-729-8572, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
831536-00
NSN: 5340-00-729-8572
FSC: 5340 — Hardware, Commercial
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeFRICTION
overall_height0.560 INCHES NOMINAL IN
overall_diameter1.524 INCHES NOMINAL IN
special_featuresCOLOR IS RED
part_name_assigned_by_controlling_agencyCOVER,ELECTRICAL CONNECTOR
opening_inside_diameter_for_which_designed1.334 INCHES NOMINAL IN
NSN5340-00-729-8572
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 831536-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.524 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.334 INCHES NOMINAL IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.560 INCHES NOMINAL IN
DESIGN TYPEFRICTION
OVERALL DIAMETER1.524 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.334 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR IS RED
PART NAME ASSIGNED BY CONTROLLING AGENCYCOVER,ELECTRICAL CONNECTOR
MATERIALPLASTIC, POLYETHYLENE (PP)
SUBSTITUTES & CROSS-REFERENCES 5
733395-486Reference document
Same NSN cross-reference
Reference document — Secondary reference
833935Reference document
Same NSN cross-reference
Reference document — Secondary reference
011090Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
907223-08Reference document
Same NSN cross-reference
Reference document — Secondary reference
10598796-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 831536-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 831536-00?
831536-00 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 831536-00?
There are 5 known substitutes for 831536-00: 733395-486, 833935, 011090 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 831536-00?
831536-00 is cataloged in the U.S. Government catalog under NSN 5340-00-729-8572. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 831536-00