The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: WEDGE IS INCLUDED ON LOOP, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-332-6640, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
830WD13R
NSN:5340-01-332-6640 FSC:5340 — Hardware, Commercial CAGE:83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
diameter
0.204 INCHES NOMINAL IN
material
RUBBER SILICONE CLASS Q CUSHION
overall_width
0.500 INCHES NOMINAL IN
special_features
WEDGE IS INCLUDED ON LOOP
style_designator
SINGLE LOOP
tongue_hole_type
ROUND, UNTHREADED
surface_treatment
CHROMATE BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
material_document_and_classification
AMS 3347 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end
1.127 INCHES MINIMUM AND 1.157 INCHES MAXIMUM IN
surface_treatment_document_and_classification
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BOLT A
NSN
5340-01-332-6640
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BOLT A
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3347 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.127 INCHES MINIMUM AND 1.157 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BOLT A
STYLE DESIGNATOR
SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 3347 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-25014,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER
0.204 INCHES NOMINAL IN
OVERALL WIDTH
0.500 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
1.127 INCHES MINIMUM AND 1.157 INCHES MAXIMUM IN
SPECIAL FEATURES
WEDGE IS INCLUDED ON LOOP
SURFACE TREATMENT
CHROMATE BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 830WD13R?
830WD13R is a CLAMP,LOOP.
What parts can replace 830WD13R?
There are 2 known substitutes for 830WD13R: 09A067WD13R, TA025035WDC13HW. Substitute compatibility should be verified for your specific system.
What is the NSN for 830WD13R?
830WD13R is cataloged in the U.S. Government catalog under NSN 5340-01-332-6640. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.