PartsTable
Technical Data Sheet
Download PDF

83023 — CAPACITOR,FIXED,MICA DIELECTRIC

✓ Government record, cited
Hama · MRO · MRO_GENERAL
PRODUCT OVERVIEW

83023: CAPACITOR,FIXED,MICA DIELECTRIC.

- For good and interference-free signal transmission. - Fully shielded metal plugs for best shielding. - Wires with high-density shielding for audio.

- Gold-plated contact surfaces. - Outside diameter: 4.5 mm. - Mechanical resistance.

- Very small design plugs. - Easy to grasp due to additional silicone ring. - Colour: black.

- Length: 3.0 m. This part is cataloged in the U.S. Government catalog under NSN 5310-00-011-4604, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 83023
NSN: 5310-00-011-4604
NIINs: 000114604, 002302285, 006865164, 012382116, 012535691, 012714212, 012770791, 013007834, 013044379, 013068865, 013068866, 013102113, 013142013, 013770125, 013835888, 013852867, 014005937, 014063803, 014183914, 014478093, 014593035, 014597485, 014635474, 014870375
FSC: 5310 — Nuts and Washers
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
body_styleEJECTOR, SLIM FACE GRIP
overall_width0.250 INCHES NOMINAL IN
overall_height0.640 INCHES NOMINAL IN
overall_length1.120 INCHES NOMINAL IN
special_featuresESD
end_item_identificationE/I FSCM 24384 NSN5815-01-262-4611
criticality_code_justificationFEAT
unthreaded_mounting_hole_diameter0.093 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity2 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
NSN5310-00-011-4604
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 83023 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: -QQ-S-633 CANC FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION-QQ-S-633 CANC FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.494 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAB TYPE
MATERIALSTEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
114604Reference document
Same NSN cross-reference
Reference document — Secondary reference
BEAX7FReference document
Same NSN cross-reference
Reference document — Secondary reference
914105Reference document
Same NSN cross-reference
Reference document — Secondary reference
34940SReference document
Same NSN cross-reference
Reference document — Secondary reference
7368762Reference document
Same NSN cross-reference
Reference document — Secondary reference
SD4235Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 83023?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83023?
83023 is a CAPACITOR,FIXED,MICA DIELECTRIC manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 83023?
There are 7 known substitutes for 83023: 114604, BEAX7F, 914105 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 83023?
83023 is cataloged in the U.S. Government catalog under NSN 5310-00-011-4604. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83023

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.