PartsTable
Technical Data Sheet
Download PDF

830206 — SLEEVE,COMPRESSION,TUBE-HOSE FIT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

830206: SLEEVE,COMPRESSION,TUBE-HOSE FIT.

SLEEVE,COMPRESSION,TUBE-HOSE FIT. Key specifications include discharge_pressure: 000.0 WATER CONSERVING - WATER SAVING TECHNOLOGIES - LOW-FLOW PRE-RINSE SPRAY VALVES, pumping_element_type: PISTON, pump_rotation_direction: CLOCKWISE AND COUNTERCLOCKWISE, reciprocating_stroke_type: VARIABLE, maximum_discharge_flow_rate: 119.0 GALLONS PER MINUTE, operating_speed_at_rated_capacity: 2500.0 REVOLUTIONS PER MINUTE. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-359-1021, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
830206
NSN: 5310-00-359-1021
NIINs: 003591021, 010669484, 012696642
FSC: 5310 — Nuts and Washers
CAGE: 12603 — CLARK EQUIPMENT CO (USA)
SPECIFICATIONS
cylinder_quantity9
discharge_pressure000.0 WATER CONSERVING - WATER SAVING TECHNOLOGIES - LOW-FLOW PRE-RINSE SPRAY VALVES
pumping_element_typePISTON
pump_rotation_directionCLOCKWISE AND COUNTERCLOCKWISE
reciprocating_stroke_typeVARIABLE
maximum_discharge_flow_rate119.0 GALLONS PER MINUTE
operating_speed_at_rated_capacity2500.0 REVOLUTIONS PER MINUTE
pumping_element_operating_positionHORIZONTAL
NSN5310-00-359-1021
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 830206 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DISTANCE INCLUDING KEYS: 0.869 INCHES NOMINAL IN
•
STYLE DESIGNATOR: KEY
•
OUTSIDE DIAMETER: 0.856 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.041 INCHES NOMINAL IN
•
EXTERNAL STRAIGHT KEY WIDTH: 0.153 INCHES NOMINAL IN
•
EXTERNAL KEY QUANTITY: 2
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.458 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DISTANCE INCLUDING KEYS0.869 INCHES NOMINAL IN
STYLE DESIGNATORKEY
OUTSIDE DIAMETER0.856 INCHES NOMINAL IN
MATERIAL THICKNESS0.041 INCHES NOMINAL IN
EXTERNAL STRAIGHT KEY WIDTH0.153 INCHES NOMINAL IN
EXTERNAL KEY QUANTITY2
MATERIALSTEEL OVERALL
HOLE DIAMETER0.458 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
FC11136BReference document
Same NSN cross-reference
Reference document — Secondary reference
F11136BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FC11136Reference document
Same NSN cross-reference
Reference document — Secondary reference
6CFC11136Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 830206?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 830206?
830206 is a SLEEVE,COMPRESSION,TUBE-HOSE FIT.
What parts can replace 830206?
There are 4 known substitutes for 830206: FC11136B, F11136B, FC11136 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 830206?
830206 is cataloged in the U.S. Government catalog under NSN 5310-00-359-1021. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 830206