PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8301448
8301448 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.334 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, diameter: 0.991 INCHES MINIMUM AND 0.996 INCHES MAXIMUM IN, pin_head_diameter: 1.178 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN, under_head_length: 3.650 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN, first_hole_diameter: 0.203 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-315-9005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8301448
NSN: 5315-01-315-9005
FSC: 5315
CAGE: 1YHH8 — JLG INDUSTRIES, INC. (USA)
SPECIFICATIONS
height0.334 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
diameter0.991 INCHES MINIMUM AND 0.996 INCHES MAXIMUM IN
pin_head_diameter1.178 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
under_head_length3.650 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN
first_hole_diameter0.203 INCHES NOMINAL IN
NSN5315-01-315-9005
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8301448 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.991 INCHES MINIMUM AND 0.996 INCHES MAXIMUM IN
•
PIN HEAD DIAMETER: 1.178 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
•
FIRST HOLE DIAMETER: 0.203 INCHES NOMINAL IN
•
HEIGHT: 0.334 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 3.650 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.991 INCHES MINIMUM AND 0.996 INCHES MAXIMUM IN
PIN HEAD DIAMETER1.178 INCHES MINIMUM AND 1.190 INCHES MAXIMUM IN
FIRST HOLE DIAMETER0.203 INCHES NOMINAL IN
HEIGHT0.334 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
UNDER HEAD LENGTH3.650 INCHES MINIMUM AND 3.666 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
1F4622Interchangeable
interchangeable cross-reference
interchangeable
354080Interchangeable
interchangeable cross-reference
interchangeable
942532Interchangeable
interchangeable cross-reference
interchangeable
394-6709-1193487PC25Interchangeable
interchangeable cross-reference
interchangeable
282-6702-771585REVBPC25Interchangeable
interchangeable cross-reference
interchangeable
3768-86REVAPC25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8301448?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8301448?
8301448 is a PIN,STRAIGHT,HEADED.
What parts can replace 8301448?
There are 21 known substitutes for 8301448: 1F4622, 354080, 942532 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8301448?
8301448 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-315-9005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8301448

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026