PartsTable
Technical Data Sheet
PartsTable / MRO / 83004
83004 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include width: 2.7000 INCHES MINIMUM AND 2.8000 INCHES MAXIMUM IN, length: 3.4500 INCHES MINIMUM AND 4.5500 INCHES MAXIMUM IN, material: ALUMINUM, hole_diameter: 0.1380 INCHES NOMINAL IN, body_thickness: 0.1200 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN, conductor_form: STRANDED SINGLE CONDUCTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-469-9993, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 83004
NSN: 6145-01-469-9993
FSC: 6145
CAGE: 81774 — GENERAL CABLE CORPORATION DIV CORPORATE (USA)
SPECIFICATIONS
width2.7000 INCHES MINIMUM AND 2.8000 INCHES MAXIMUM IN
length3.4500 INCHES MINIMUM AND 4.5500 INCHES MAXIMUM IN
materialALUMINUM
hole_diameter0.1380 INCHES NOMINAL IN
body_thickness0.1200 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM IN
conductor_formSTRANDED SINGLE CONDUCTOR
special_featuresAWG SIZE 4, COND STRAND 259, NOM INS THICKNESS 0.060, NOMINAL O D 0.585, CURRENT AMPS 145, VOLTAGE RATING 600 VOLT TYPE RHH/RHW
securing_device_typeSPECIAL
peripheral_shape_styleRECTANGLE, MULTI HOLES
end_item_identificationCBIL SDV M1 HTN
cross-sectional_shape_styleFLAT W/OPEN CENTER
mounting_opening_shape_styleUNTHREADED HOLE
NSN6145-01-469-9993
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 83004 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONDUCTOR FORM: STRANDED SINGLE CONDUCTOR
•
CROSS-SECTIONAL SHAPE STYLE: COIL/CORD
•
MATERIAL: COPPER CORE CONDUCTOR ALL CONDUCTORS
TECHNICAL CHARACTERISTICS (FLIS)
CONDUCTOR FORMSTRANDED SINGLE CONDUCTOR
CROSS-SECTIONAL SHAPE STYLECOIL/CORD
SPECIAL FEATURESAWG SIZE 4, COND STRAND 259, NOM INS THICKNESS 0.060, NOMINAL O D 0.585, CURRENT AMPS 145, VOLTAGE RATING 600 VOLT TYPE RHH/RHW
MATERIALCOPPER CORE CONDUCTOR ALL CONDUCTORS
END ITEM IDENTIFICATIONCBIL SDV M1 HTN
CONDUCTOR FORMSTRANDED SINGLE CONDUCTOR
CROSS-SECTIONAL SHAPE STYLECOIL/CORD
SPECIAL FEATURESAWG SIZE 4, COND STRAND 259, NOM INS THICKNESS 0.060, NOMINAL O D 0.585, CURRENT AMPS 145, VOLTAGE RATING 600 VOLT TYPE RHH/RHW
MATERIALCOPPER CORE CONDUCTOR ALL CONDUCTORS
END ITEM IDENTIFICATIONCBIL SDV M1 HTN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
99018-11Interchangeable
interchangeable cross-reference
interchangeable
AP465Interchangeable
interchangeable cross-reference
interchangeable
83004Interchangeable
interchangeable cross-reference
interchangeable
VV122Interchangeable
interchangeable cross-reference
interchangeable
19-8-3231Interchangeable
interchangeable cross-reference
interchangeable
5365PL0578555Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 83004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83004?
83004 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 83004?
There are 18 known substitutes for 83004: 99018-11, AP465, 83004 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 83004?
83004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-469-9993. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026