PartsTable
Technical Data Sheet
Download PDF

83001-158 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

83001-158: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include design_type: FRICTION, overall_diameter: 11.760 INCHES NOMINAL IN, special_features: 1.320 IN. O/A HT.

IN, fsc_application_data: HYDR TEST STAND, end_item_identification: P/N 83001-124, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S. Government catalog under NSN 5340-01-249-6352, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
83001-158
NSN: 5340-01-249-6352
FSC: 5340 — Hardware, Commercial
CAGE: 56529 — HYDRAULICS INTERNATIONAL, INC. DBA HYDRAULICS INTERNATIONAL INC (USA)
SPECIFICATIONS
design_typeFRICTION
overall_diameter11.760 INCHES NOMINAL IN
special_features1.320 IN. O/A HT. IN
fsc_application_dataHYDR TEST STAND
end_item_identificationP/N 83001-124
round_cap_outside_surface_conditionSMOOTH
opening_inside_diameter_for_which_designed11.690 INCHES NOMINAL IN
NSN5340-01-249-6352
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 83001-158 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: HYDR TEST STAND
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 11.760 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 11.690 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAHYDR TEST STAND
DESIGN TYPEFRICTION
OVERALL DIAMETER11.760 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED11.690 INCHES NOMINAL IN
SPECIAL FEATURES1.320 IN. O/A HT. IN
END ITEM IDENTIFICATIONP/N 83001-124
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 83001-158?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83001-158?
83001-158 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What is the NSN for 83001-158?
83001-158 is cataloged in the U.S. Government catalog under NSN 5340-01-249-6352. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83001-158