PartsTable
Technical Data Sheet
Download PDF

83-697 — KNURLING TOOL,MACHINE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

83-697: KNURLING TOOL,MACHINE.

The KNURLING TOOL,MACHINE is a the manufacturer industrial component. Key specifications include cut_type: COARSE, shank_width: 0.620 INCHES NOMINAL IN, shank_height: 1.370 INCHES NOMINAL IN, shank_length: 7.500 INCHES NOMINAL IN, knurl_pattern: RAISED DIAMOND, special_features: REVOLVING HEAD OF TOOL REQUIRES THREE PAIRS OF KNURLS,ONE PAIR EACH COARSE,MEDIUM AND FINE CUT TYPES. This part is cataloged in the U.S.

Government catalog under NSN 3455-00-250-2593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
83-697
NSN: 3455-00-250-2593
NIINs: 002502593, 012019750
FSC: 3455 — Cutting Tools for Machine Tools
CAGE: 636D0 — APEX TOOL GROUP, LLC DBA NICHOLSON (USA)
SPECIFICATIONS
cut_typeCOARSE
shank_width0.620 INCHES NOMINAL IN
shank_height1.370 INCHES NOMINAL IN
shank_length7.500 INCHES NOMINAL IN
knurl_patternRAISED DIAMOND
special_featuresREVOLVING HEAD OF TOOL REQUIRES THREE PAIRS OF KNURLS,ONE PAIR EACH COARSE,MEDIUM AND FINE CUT TYPES
knurling_face_width0.250 INCHES NOMINAL IN
knurl_outside_diameter0.750 INCHES NOMINAL IN
knurl_pinhole_diameter0.250 INCHES NOMINAL IN
revolving_head_featureINCLUDED
knurl_roll_overall_width0.370 INCHES NOMINAL IN
minimum_knurling_capacity0.250 INCHES IN
NSN3455-00-250-2593
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available KNURLING TOOL,MACHINE TITLE COMPONENT PN 83-697 MFR KNURLING TOOL,MACHINE
KEY FEATURES
•
KNURL OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
MINIMUM KNURLING CAPACITY: 0.250 INCHES IN
•
KNURLING FACE WIDTH: 0.250 INCHES NOMINAL IN
•
KNURL PINHOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
SHANK HEIGHT: 1.370 INCHES NOMINAL IN
•
SHANK LENGTH: 7.500 INCHES NOMINAL IN
•
CUT TYPE: COARSE
•
SHANK WIDTH: 0.620 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
KNURL OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
MINIMUM KNURLING CAPACITY0.250 INCHES IN
KNURLING FACE WIDTH0.250 INCHES NOMINAL IN
KNURL PINHOLE DIAMETER0.250 INCHES NOMINAL IN
SHANK HEIGHT1.370 INCHES NOMINAL IN
SHANK LENGTH7.500 INCHES NOMINAL IN
CUT TYPECOARSE
SHANK WIDTH0.620 INCHES NOMINAL IN
SPECIAL FEATURESREVOLVING HEAD OF TOOL REQUIRES THREE PAIRS OF KNURLS,ONE PAIR EACH COARSE,MEDIUM AND FINE CUT TYPES
KNURL ROLL OVERALL WIDTH0.370 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
3K2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 83-697?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83-697?
83-697 is a KNURLING TOOL,MACHINE.
What parts can replace 83-697?
There is 1 known substitute for 83-697: 3K2. Substitute compatibility should be verified for your specific system.
What is the NSN for 83-697?
83-697 is cataloged in the U.S. Government catalog under NSN 3455-00-250-2593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83-697

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.