PartsTable
Technical Data Sheet
83-025 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For good and interference-free signal transmission.<br>- Fully shielded metal plugs for best shielding.<br>- Wires with high-density shielding for audio.<br>- Gold-plated contact surfaces.<br>- Outside diameter: 5.0 mm.<br>- Mechanical resistance.<br>- Very small design plugs.<br>- Easy to grasp due to additional silicone ring.<br>- Colour: black.<br>- Length: 3.0 m. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-5545, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
83-025
NSN: 5310-00-011-5545
FSC: 5310
CAGE: 29201 — JOHN DEER CONSUMER PRODUCTS INC (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
body_styleT-SHAPE
body_width0.342 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
shell_typeSOLID
body_height0.045 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
body_length0.342 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
design_typeTURNING
holder_typeSTRAIGHT
shank_width0.625 INCHES NOMINAL IN
shank_height1.375 INCHES NOMINAL IN
shank_length4.750 INCHES NOMINAL IN
hole_diameter0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
NSN5310-00-011-5545
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 83-025 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STYLE DESIGNATOR: FLAT INTERNAL TEETH
HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT INTERNAL TEETH
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
X1270Interchangeable
interchangeable cross-reference
interchangeable
210-3191Interchangeable
interchangeable cross-reference
interchangeable
MILR3065Interchangeable
interchangeable cross-reference
interchangeable
138073Interchangeable
interchangeable cross-reference
interchangeable
P36Interchangeable
interchangeable cross-reference
interchangeable
10424334Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 83-025?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83-025?
83-025 is a RESISTOR,FIXED,COMPOSITION manufactured by Hama.
What parts can replace 83-025?
There are 28 known substitutes for 83-025: X1270, 210-3191, MILR3065 and 25 more. Substitute compatibility should be verified for your specific system.
Is 83-025 still available?
83-025 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83-025