PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 83-00213
83-00213 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: DISHED HEXAGON, head_height: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.268 INCHES NOMINAL IN, fastener_length: 0.328 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-238-1207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
83-00213
NSN: 5306-01-238-1207
FSC: 5306
CAGE: U0215 — WINDER POWER LIMITED (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleDISHED HEXAGON
head_height0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
thread_class2A A
thread_length0.268 INCHES NOMINAL IN
fastener_length0.328 INCHES NOMINAL IN
special_featuresINCL WASHER,VALCONIZED HARD RED FIBER,0.296/0.301 IN. ID,0.557/0.571 IN. OD IN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_between_flats0.500 INCHES NOMINAL IN
nominal_thread_diameter0.312 INCHES IN
thread_quantity_per_inch24
NSN5306-01-238-1207
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 83-00213 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.328 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL: STEEL OVERALL
•
HEAD STYLE: DISHED HEXAGON
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.328 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
MATERIALSTEEL OVERALL
HEAD STYLEDISHED HEXAGON
SPECIAL FEATURESINCL WASHER,VALCONIZED HARD RED FIBER,0.296/0.301 IN. ID,0.557/0.571 IN. OD IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
411000-1Interchangeable
interchangeable cross-reference
interchangeable
7040035-1Interchangeable
interchangeable cross-reference
interchangeable
4N28Interchangeable
interchangeable cross-reference
interchangeable
M0C1003Interchangeable
interchangeable cross-reference
interchangeable
4320PL1664582Interchangeable
interchangeable cross-reference
interchangeable
695545-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 83-00213?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 83-00213?
83-00213 is a BOLT,MACHINE.
What parts can replace 83-00213?
There are 8 known substitutes for 83-00213: 411000-1, 7040035-1, 4N28 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 83-00213?
83-00213 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-238-1207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 83-00213

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026