PartsTable
Technical Data Sheet
PartsTable / MRO / 82909
82909 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: BUSHING MOUNT, body_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, body_height: 1.000 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, body_length: 1.346 INCHES MAXIMUM IN, overall_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, actuator_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-4884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 82909
NSN: 5330-00-056-4884
FSC: 5330
CAGE: 29666 — HUCK MFG CO (USA)
SPECIFICATIONS
body_styleBUSHING MOUNT
body_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
body_height1.000 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
body_length1.346 INCHES MAXIMUM IN
overall_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
actuator_styleROUND
bushing_length0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_height2.110 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
overall_length1.346 INCHES MAXIMUM IN
actuator_height1.110 INCHES MINIMUM AND 1.204 INCHES MAXIMUM IN
mounting_methodTHREADED BUSHING
NSN5330-00-056-4884
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 82909 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
ASC1533289Interchangeable
interchangeable cross-reference
interchangeable
453100206Interchangeable
interchangeable cross-reference
interchangeable
7560K6Interchangeable
interchangeable cross-reference
interchangeable
82909Interchangeable
interchangeable cross-reference
interchangeable
PL310 10K0 AA111 KGInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82909?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82909?
82909 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 82909?
There are 5 known substitutes for 82909: ASC1533289, 453100206, 7560K6 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 82909?
82909 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-056-4884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82909

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026