PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 827973
827973 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, housing_bore_diameter: 3.751 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 2.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1623, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
827973
NSN: 5330-00-291-1623
FSC: 5330
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
housing_bore_diameter3.751 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-291-1623
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 827973 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 2.750 INCHES NOMINAL IN
•
SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
SEAL WIDTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
39-529-44-84Interchangeable
interchangeable cross-reference
interchangeable
H28018Interchangeable
interchangeable cross-reference
interchangeable
2935-244Interchangeable
interchangeable cross-reference
interchangeable
350535-ISSBInterchangeable
interchangeable cross-reference
interchangeable
350535Interchangeable
interchangeable cross-reference
interchangeable
350535AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 827973?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 827973?
827973 is a SEAL,PLAIN ENCASED.
What parts can replace 827973?
There are 33 known substitutes for 827973: 39-529-44-84, H28018, 2935-244 and 30 more. Substitute compatibility should be verified for your specific system.
Is 827973 still available?
827973 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 827973

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026