PartsTable
Technical Data Sheet
PartsTable / MRO / 827476
827476 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, body_style: RECTANGULAR DIMENSIONAL ENVELOPE, cone_width: 0.7710 INCHES NOMINAL IN, reset_method: AUTOMATIC, bore_diameter: 1.2500 INCHES NOMINAL IN, overall_width: 4.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 827476
NSN: 3110-00-100-3144
FSC: 3110
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleRECTANGULAR DIMENSIONAL ENVELOPE
cone_width0.7710 INCHES NOMINAL IN
reset_methodAUTOMATIC
bore_diameter1.2500 INCHES NOMINAL IN
overall_width4.625 INCHES NOMINAL IN
pole_quantity1
overall_height4.000 INCHES NOMINAL IN
overall_length10.500 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
features_providedADJUSTABLE TRIP RELEASE
cone_corner_radius0.0312 INCHES NOMINAL IN
NSN3110-00-100-3144
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 827476 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.7710 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.2500 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.7710 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
1068689Interchangeable
interchangeable cross-reference
interchangeable
900380-009Interchangeable
interchangeable cross-reference
interchangeable
502-120-018BRHTInterchangeable
interchangeable cross-reference
interchangeable
6550FInterchangeable
interchangeable cross-reference
interchangeable
J1250Interchangeable
interchangeable cross-reference
interchangeable
55452Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 827476?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 827476?
827476 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 827476?
There are 23 known substitutes for 827476: 1068689, 900380-009, 502-120-018BRHT and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 827476?
827476 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 827476

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026