PartsTable
Technical Data Sheet
Download PDF

827436 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

827436: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, material: STEEL OVERALL, cone_width: 1.6250 INCHES NOMINAL IN, bore_diameter: 2.7500 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, special_features: AXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.3100 IN. IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0666, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
827436
NSN: 3110-00-100-0666
NIINs: 001000666, 001430286
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
diameter0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
materialSTEEL OVERALL
cone_width1.6250 INCHES NOMINAL IN
bore_diameter2.7500 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
special_featuresAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.3100 IN. IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
distance_from_loop_center_to_tongue_end1.432 INCHES MINIMUM AND 1.522 INCHES MAXIMUM IN
NSN3110-00-100-0666
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 827436 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.6250 INCHES NOMINAL IN
SPECIAL FEATURESAXIAL DISTANCE BETWEEN CENTER OF ROLLER CONTACT LINE & CONE STABILITY POINT ON SHAFT AXIS 0.3100 IN. IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
132-0-068Reference document
Same NSN cross-reference
Reference document — Secondary reference
BT655Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
655Reference document
Same NSN cross-reference
Reference document — Secondary reference
187315Reference document
Same NSN cross-reference
Reference document — Secondary reference
70928149Reference document
Same NSN cross-reference
Reference document — Secondary reference
1AT0315Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 827436?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 827436?
827436 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 827436?
There are 6 known substitutes for 827436: 132-0-068, BT655, 655 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 827436?
827436 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0666. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 827436

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.