PartsTable
Technical Data Sheet
Download PDF

8270626 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

8270626: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: STEEL CORROSION RESISTING, drive_type: RAISED RIB, design_type: FRICTION, surface_treatment: PASSIVATE, tube_outside_diameter_for_which_designed: 0.160 INCHES NOMINAL IN, opening_inside_diameter_for_which_designed: 0.249 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-546-9738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8270626
NSN: 5340-00-546-9738
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
drive_typeRAISED RIB
design_typeFRICTION
special_featuresLOZENGE-SHAPED HEAD 0.240 IN. W X0.500 IN. LG X 0.155 IN. H; SHANK FLATTO 0.225 IN. DIA X 0.227 IN. LG 0.060 IN. FROM END; 63AA FINISH ON SHANK IN
surface_treatmentPASSIVATE
tube_outside_diameter_for_which_designed0.160 INCHES NOMINAL IN
opening_inside_diameter_for_which_designed0.249 INCHES NOMINAL IN
NSN5340-00-546-9738
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8270626 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
DRIVE TYPE: RAISED RIB
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.160 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.249 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
DRIVE TYPERAISED RIB
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.160 INCHES NOMINAL IN
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.249 INCHES NOMINAL IN
SPECIAL FEATURESLOZENGE-SHAPED HEAD 0.240 IN. W X0.500 IN. LG X 0.155 IN. H; SHANK FLATTO 0.225 IN. DIA X 0.227 IN. LG 0.060 IN. FROM END; 63AA FINISH ON SHANK IN
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1290005469738Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 8270626?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8270626?
8270626 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 8270626?
There is 1 known substitute for 8270626: 1290005469738. Substitute compatibility should be verified for your specific system.
What is the NSN for 8270626?
8270626 is cataloged in the U.S. Government catalog under NSN 5340-00-546-9738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8270626