PartsTable / O-RING / 82566-125
82566-125
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 3.465 INCHES MINIMUM AND 3.513 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-620-3269, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
82566-125
NSN: 5331-00-620-3269 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER SYNTHETIC center_hole_diameter 3.465 INCHES MINIMUM AND 3.513 INCHES MAXIMUM IN cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-00-620-3269
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 82566-125
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• MATERIAL: RUBBER SYNTHETIC
• CENTER HOLE DIAMETER: 3.465 INCHES MINIMUM AND 3.513 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN MATERIAL RUBBER SYNTHETIC CENTER HOLE DIAMETER 3.465 INCHES MINIMUM AND 3.513 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
20-63-80 Interchangeable interchangeable cross-reference
interchangeable
1982 Interchangeable interchangeable cross-reference
interchangeable
J-45554 Interchangeable interchangeable cross-reference
interchangeable
3344-A Interchangeable interchangeable cross-reference
interchangeable
MIL-P-83248 Interchangeable interchangeable cross-reference
interchangeable
MIL-R-83248/2 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 82566-125?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82566-125?
82566-125 is a O-RING.
What parts can replace 82566-125?
There are 8 known substitutes for 82566-125: 20-63-80, 1982, J-45554 and 5 more. Substitute compatibility should be verified for your specific system.
Is 82566-125 still available?
82566-125 is currently cancelled.
Request a Quote — 82566-125