PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82527
82527 ✓ Verified by PartsTable
Sandberg · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a Sandberg industrial component. Key specifications include material: STEEL OVERALL, ring_style: EXTERNAL, usage_design: EXTERNAL, overall_length: 0.438 INCHES NOMINAL IN, first_end_style: POINTED, inside_diameter: 0.281 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-233-2413, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82527
NSN: 5315-00-233-2413
FSC: 5315
CAGE: 55972 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
ring_styleEXTERNAL
usage_designEXTERNAL
overall_length0.438 INCHES NOMINAL IN
first_end_stylePOINTED
inside_diameter0.281 INCHES NOMINAL IN
major_thickness0.025 INCHES NOMINAL IN
style_designatorCENTER GROOVE
surface_treatmentZINC OVERALL
first_end_locationBOTH ENDS
first_end_taper_angle127.0 DEGREES NOMINAL
intermediate_diameter0.134 INCHES NOMINAL IN
NSN5315-00-233-2413
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 82527 · Sandberg ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN SMALL END DIAMETER: 0.125 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
STYLE DESIGNATOR: CENTER GROOVE
•
FIRST END TAPER ANGLE: 127.0 DEGREES NOMINAL
•
FIRST END STYLE: POINTED
•
INTERMEDIATE DIAMETER: 0.134 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.438 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN SMALL END DIAMETER0.125 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
STYLE DESIGNATORCENTER GROOVE
FIRST END TAPER ANGLE127.0 DEGREES NOMINAL
FIRST END STYLEPOINTED
INTERMEDIATE DIAMETER0.134 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
03S63-79Interchangeable
interchangeable cross-reference
interchangeable
715634PC14Interchangeable
interchangeable cross-reference
interchangeable
S7451Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82527?
82527 is a PIN,GROOVED,HEADLESS manufactured by Sandberg.
What parts can replace 82527?
There are 3 known substitutes for 82527: 03S63-79, 715634PC14, S7451. Substitute compatibility should be verified for your specific system.
Is 82527 still available?
82527 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82527

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026