PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 82404
82404 ✓ Verified by PartsTable
Indesit · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a Indesit industrial component. Key specifications include material: ASBESTOS OVERALL, duty_type: CONTINUOUS, thread_class: 2B SINGLE MOUNTING FACILITY, hole_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 12.090 INCHES MINIMUM AND 12.150 INCHES MAXIMUM IN, aperture_width: 10.620 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-0500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
82404
NSN: 5330-00-618-0500
FSC: 5330
CAGE: 72599 — ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
duty_typeCONTINUOUS
thread_class2B SINGLE MOUNTING FACILITY
coil_quantity1
hole_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width12.090 INCHES MINIMUM AND 12.150 INCHES MAXIMUM IN
aperture_width10.620 INCHES NOMINAL IN
overall_height1.500 INCHES NOMINAL IN
overall_length19.590 INCHES MINIMUM AND 19.650 INCHES MAXIMUM IN
aperture_length18.120 INCHES NOMINAL IN
special_featuresMATERIAL NON-ASBESTOS
style_designatorNON-CIRCULAR
NSN5330-00-618-0500
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 82404 MFR: Indesit ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL THICKNESS: 0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.166 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL THICKNESS0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.270 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
OVERALL LENGTH19.590 INCHES MINIMUM AND 19.650 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.166 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE WIDTH10.620 INCHES NOMINAL IN
OVERALL WIDTH12.090 INCHES MINIMUM AND 12.150 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
9660-040-125Interchangeable
interchangeable cross-reference
interchangeable
107038AInterchangeable
interchangeable cross-reference
interchangeable
16941Interchangeable
interchangeable cross-reference
interchangeable
82404 NON-ASBESTOSInterchangeable
interchangeable cross-reference
interchangeable
82404Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 82404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 82404?
82404 is a RELAY,ELECTROMAGNETIC manufactured by Indesit.
What parts can replace 82404?
There are 5 known substitutes for 82404: 9660-040-125, 107038A, 16941 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 82404?
82404 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-618-0500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 82404

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026